Integrated WDM System

location：> PRODUCT > Subsystem > Integrated WDM System

• 

  OSP Platform Frame

  OSP is a series of compact platform for subsystem, which is the basis for the integration of subsystem products. The platform support different function cards: EDFA, OEO, OLP, OLM, FEC, RFA, OCM, TDC, passive modules and other types of more than 20 types of cards, all function cards support hot swap during three platforms. OSP has high compact structure, flexible co...

  

  pre

  

  down
• 

  OSP EMU Card

  The main card of the OSP platform adopts the high-performance Power PC architecture embedded network-processing chip, which can provide the interface of the internal communication between the single card and the main control card. At the same time, it can manage the information of each single card; it also provides an external cascade port for easy connection to the second external device ...

  

  pre

  

  down
• 

  OSC Card

  The OSC card is a key part of the OSP products, the service maintenance channels based on Ethernet technology. Two direction OSC Board is using two optical fiber to connect the devices. Single direction OSC Board is using one optical fiber to connect the devices. It will help standardize the management. OSC boards can be used for OA stations, OTM stations and OADM ...

  

  pre

  

  down
• 

  2.5G OEO Card

  2.5G OEO dual-directional and unidirectional board is a compact, high-density, optical converter with low-power consumption. It can support 3R (Re-amplifying, Re-timing, Re-shaping), wavelength conversion function and be combined with MUX/DEMUX in order to realize the DWDM transport system. The card is equipped with SFP or ESFP optical module, which supports hot hot-p...

  

  pre

  

  down
• 

  10G OEO Card

  10G OEO dual-directional and unidirectional board is a compact, high-density, optical converter with low-power consumption. It can support 3R(Re-amplifying, Re-timing, Re-shaping), wavelength conversion function, and be combined with MUX/DEMUX in order to realize the DWDM transport system. The board is equipped with XFP (4-channel) or SFP + (8-channel) optical module to...

  

  pre

  

  down
• 

  10G FEC Card

  10G FEC board is a compact, high-density, low-power optoelectronic optical converter to realize the two-way STM-64 / OC-192 / 10G WAN to OTU2 conversion, or dual two-way 10G LAN to OTU1e / OTU2e conversion, support for standard ITU-T G.709 FEC, or higher coding gain Enhanced FEC (G.975.1 I.4 and I.7 FEC), can effectively reduce the system requirements fo...

  

  pre

  

  down
• 

  100G Card

  100G Muxponder board can realize that 10 channels business of 10GE can be mapped into 10 channels’ ODU2, then all ODU2 can be mapped into ODU4 which added FEC decision information will turn into OTU4. At last, the board use the coherent module of line port to realize the long-haul of single wavelength. 100G Repeater board has the regeneration function of single direction, a...

  

  pre

  

  down
• 

  EDFA-FGA Card

  Fixed-gain optical amplifier FGA board is an important part of OSP products, the product used in DWDM transmission system, to achieve the signal relay amplification, to extend the transmission distance. It can be divided into BA, PA, LA, etc. BA is used to improve the output power of the transmitter, LA is used to compensate the optical power loss on the line, PA is used to...

  

  pre

  

  down